Economical electronic digital scale with LCD display that can be mounted on DeWalt 625 router to display router plunge depth. Alternatively, it can also be mounted on guide rails to display router crosscut position. Reads 3 ways with choice of .01mm, .001", or 1/64" resolution and instant zero for "deviation" measurement. It displays a measurement from a starting zero point such as top or edge of board. All required hardware and instructions are included. No drilling or tapping of machine is required. When mounted on guide rails the scale may need to be removed for some operations.
For plunge depth usage some adaptation may be required for routers other than DeWalt 625.
For most operations, router plunge depth and crosscut positioning can be accurately controlled with our setup gauge bars, guide rails and adjustable stops. Adding this digital scale provides an 'at a glance' display of the exact depth or position in very precise increments.
See assembly diagram
