Versatile 15” wide work holder that can hold wood at a single or compound angle for mortising, tenoning, and other operations. Quick setup. Cuts angled tenons for chair construction. Rapid adjustment friction clamps securely hold a work piece up to 4" thick either horizontally, vertically, at a left/right miter angle or at compound angles up to 45-degrees. Locator pins inserted into pattern holes aid in positioning work pieces 0 to 45 degrees in 5-degree increments and at 22.5 degrees. Can be mounted on Router Boss or WoodRat.
Includes instructions and 1 quick adjust friction clamp. It has 2 vertical t-tracks for shop made jigs or toggle clamps.
See assembly diagram.
