|
 |
4" Caliper w/fractional display
Code:30-144
Price:
$16.00
In Stock
Quantity in Basket: none
|
|
4" electronic digital caliper with fractional display. Reads 3 ways: millimeters, thousandths of inch and fractions. Measures inside or outside diameters. Includes depth gauge. Resolution: .01mm, .0005in, and 1/64in reduced to smallest denominator.
Same as our 6" caliper except a more compact size. Fits into an apron pocket. Easier to read than a ruler and often more convenient to use. The ultimate woodworker's caliper.
|
|
|
|
|
|
|
6" Caliper w/fractional display
Code:30-145
Price:
$22.00
In Stock
Quantity in Basket: none
|
|
6" electronic digital caliper with fractional display. Reads 3 ways: millimeters, thousandths of inch and fraction of inch. Measures inside or outside diameters. Includes depth gauge. Resolution: .01mm, .0005in, and 1/64in reduced to smallest denominator.
For many woodworking applications the dimension being checked is specified as a fraction. Previous electronic calipers read only in thousandths and were considered a metal working tool. Now there is a precise caliper useful for your woodworking measurements.
This caliper has all the features you desire including zero setting, auto off, stainless steel, water-resistance, large display, relative A/B measuring, thumb wheel and lithium battery. Includes case and spare battery.
Foolproof and very accurate. Easily determines drill and router bit sizes. Measures thickness of wood, width of a dado, depth of a rabbet or a hole. ABS button allows you to determine differences in thickness or width without adding or subtracting fractions.
View Aldel's Review.
|
|
|
|
|
 |
12" Caliper w/Fractional Display
Code:30-147
Price:
$45.00
In Stock
Quantity in Basket: none
|
|
12" electronic digital caliper with fractional display. Reads 3 ways: millimeters, thousandths of inch and fractions. Measures inside or outside diameters. Includes depth gauge. Resolution: .01mm, .0005in, and 1/64in reduced to smallest denominator.
All the features of our 6" caliper except with larger beam and 2-1/2" rather than 1-1/2" jaw depth. Provides fast, reliable measurements of larger pieces. More versatile and easier to read than a ruler. Includes plastic storage case and extra battery.
Available exclusively from The Craftsman Gallery.
|
|
|
|
|
 |
Tilt Box
Code:30-142
Price:
$35.00
In Stock
Quantity in Basket: none
|
|
The Tilt Box is a digital angle gauge or inclinometer that can read either actual level or a relative angle between 2 surfaces. Equipped with rare earth magnets on both sides, it will cling to vertical surfaces such as a saw blade or jointer fence, so you can measure the angle between blade and table top. The LCD digital display shows the precise tilt of the blade displayed in 1/2" high numerals with a resolution of 0.05 degrees. Much more accurate than using stationary power tool scales.
Use the Tilt Box along with our digital caliper, dial indicator with magnetic base and a square to accurately setup and align almost every machine in your shop, including your table saw, miter saw, jointer and planer. You can also use the Tilt Box to set the angles on our Multi-angle Clamping Jig. You'll find a lot of uses for this handy and remarkably accurate tool.
|
|
|
|
|
 |
Large Protractor
Code:35-600
Price:
$22.00
In Stock
Quantity in Basket: none
|
|
A large, easily read protractor is a basic tool no shop can do without. 6” diameter scale with 12” beam and locker measures angles from 10° to 170°. Includes vinyl case.
|
|
|
|
|
 |
Digital Indicator
Code:35-510
Price:
$32.00
In Stock
Quantity in Basket: none
|
|
Digital indicator with 1" travel and large, easy-to-read numerical display. Converts instantly between metric, decimal inch and fractional inch and can be zeroed at any point to measure deviation from a known position. Also has ABS and hold features. Accurate to 0.001" or 0.02mm, it is compatible with standard magnetic bases (available separately).
Useful for setting jointer knives or determining runout on a router, table-saw or drill-press. Includes batteries.
|
|
|
|
|
 |
Magnetic Base for Indicator
Code:35-500
Price:
$18.00
In Stock
Quantity in Basket: none
|
|
This powerful magnetic base is fitted with a two-part articulated arm for positioning our dial indicator or digital indicator at any angle or orientation. A fine-adjustment knob allows for precise positioning. The V-step magnetic base holds firmly to flat or round iron/steel surfaces. Knob turns magnetic force on or off for quick set-up and take-down. Black wrinkle finish.
|
|
|
|
|
 |
Digital Height Gauge
Code:35-560
Price:
$45.00
In Stock
Quantity in Basket: none
|
|
An excellent height gauge with easy-to-read 3/8" high numerical display. It accurately displays measurements in decimal inch, fractional inch, or millimeters; provides instant conversion capability; and mounts to any ferrous machine table or fence with three embedded rare-earth magnets. It can be zeroed at any point for differential measurements.
Useful for many applications including setting table-saw blade or router bit height, or jointer knife projection. When placed on a flat surface it can measure thickness.
The base is solid aluminum alloy, with a hardened stainless-steel beam. Gauge is 11" high overall with 6"/150mm capacity. Battery included.
|
|
|
|
|
 |
4' Left-to-Right Measure Stix
Code:34-180
Price:
$4.50
In Stock
Quantity in Basket: none
|
|
Starrett quality 4' left-to-right steel tape measure sticks permanently to almost any work surface for convenient, at-a-glance measurements.
Starrett SM44W
|
|
|
|
|
 |
12' Left-to-Right Measure Stix
Code:34-182
Price:
$7.50
In Stock
Quantity in Basket: none
|
|
Starrett quality 12' left-to-right steel tape measure sticks permanently to work surface for convenient, at-a-glance measurements. Cut to desired length.
Starrett SM412W
|
|
|
|
|
 |
6' Right-to-Left Measure Stix
Code:34-188
Price:
$5.00
In Stock
Quantity in Basket: none
|
|
Starrett quality 6' right-to-left steel tape measure sticks permanently to work surface for convenient, at-a-glance measurements. Cut to desired length.
Starrett SM46WRL
|
|
|
|
|
 |
12' Right-to-Left Measure Stix
Code:34-190
Price:
$7.50
In Stock
Quantity in Basket: none
|
|
Starrett quality 12' right-to-left steel tape measure sticks permanently to work surface for convenient, at-a-glance measurements. Cut to desired length.
Starrett SM412WRL
|
|
|
|
|
 |
Micro-Adjust Wheel Gauge
Code:34-310
Price:
$18.00
In Stock
Quantity in Basket: none
|
|
Scribe layout marks for tenons, mortises and other joints with this wheel gauge then cut to the scribed marks with Router Boss, saw or chisel. The cutting wheel starts and marks smoothly, without having to worry about alignment or attack angle and without tearing during cross-grain marking. The sharp hardened steel wheel is ground with an inside bevel that helps pull the gauge tight against your stock and resists following uncooperative grain.
A two-stage adjuster provides fine positioning of the gauge face until you tighten a knurled thumbscrew to secure it. An internal O-ring maintains friction on the 8” stem while setting the gauge. When not in use, the cutting wheel retracts into the face of the gauge. Extra blade included.
|
|
|
|
