An adjustable height/tilt mortising platform (31” long by 7” wide), with 5
T-tracks and 2 vice L-clamps/stops, that provides horizontal work holding for
cutting on the face or edge of wood. Attaches to Router Boss's sliding bar
providing power feed capabilities when cutting mortises, grooves, and flutes.
A cutout in fence provides for crosscut operations and a V-slot in fence allows
round object clamping. In addtion to horizontal work holding, a slot in the
platform allows boards up to 5/4" by 3.5" wide to be clamped vertically
for tenoning cuts on end of board (requires an optional toggle or UTC clamp).
Provides unique capability to cut both a mortise and a mating tenon with same
setup.
As an additional option, the mortising platform T-track can be separated and
attached vertically to the sliding bar providing capabilities similar to our
Power Feed work holder.
You can shop make a simple mortise rail from wood or MDF with plans in our manual, but our aluminum mortise table provides more function and unique versatility. Can be mounted on Router Boss or WoodRat.
See assembly diagram.
