The iGaging EZ-Depth Digital Drill Press Gauge lets you control drill depth using a highly accurate digital display (DRO) whether you are drilling 1/2" or 0.485". Drilling a through-hole is straightforward, but it becomes more challenging when you need to drill blind holes to a precise depth, like recessed fasteners or euro-style cabinet hinges.
With the EZ-Depth Gauge, you lower the bit until you touch wood, zero the display, then drill down until the DRO reads the exact depth you need. If you have multiple holes to drill, you can set the drill press depth stop to repeat the drill depth effortlessly.
The DRO displays either fractional inch, decimal inch, or millimeters, and you can change the display mode with a button.
EZ-Depth is the solution when you need to drill to a precise depth. It is easy to install, has a clear, easy-to-read display, and uses a standard 2032 (watch type) battery that will allow hundreds of hours of precision drilling.
Range: 0-5" / 0-125mm
Reading: 0.0005" | 0.01mm | inch 64th