iGaging EZ-View Router Lift DRO

1 Review(s) Write a Review

Your Price: $44.99

Part Number: 35-700-R4

Availability: In Stock.

Quantity

Description
Customer Reviews

No More Mistakes! You can now set up the bit height on your router table precisely with iGAGING's new EZ-View Router Table Lift Digital Readout (DRO). It is very flexible regarding installation options so that you can adapt it to just about any router lift. Once installed, raising or lowering your router bit an exact amount is straightforward without eyeballing a ruler, counting revolutions, or grabbing your height gauge. Observe actual bit height adjustments in real-time as made.

Mounting hardware included. Kit requires drilling two small taps in your lift using the drill bit & tap supplied or mounting with very high bond (VHB) tape.

The large, easy-to-read backlit DRO reads in inches, fractions, or millimeters and mounts easily to a ¼" T-track on the router tabletop or fence or can be mounted under the router tabletop and angled outward.

It's an ideal solution for router lifts made by ChipsFly, Woodpeckers, Jessem, Incra, Kreg, and others.

Installation and Operation Video

Features:
Measuring Range: 0 - 4"/100 mm
Resolution: 0.0005 inch / 0.01mm / 32nd inch
Accuracy: 0.0015"
ABS function
Aluminum beam

User Instructions

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

5.0

Great investment to go with my new router lif

Shipping was fast considering the DRO had to travel across the country from CA to ME - 6 days. Install was straight forward and only took about 15 minutes. I did use the tape method to attach the DRO to the lift. I figured I could always go back and drill and tap for screws if I need to but the tape is solid. (drill, tap and screws included). I did set up my small draw lock bit with it and the height came out perfect. Needed to set the bit to 1/4" per bit instructions and used the DRO for this setting. The bit was dead on for height. The entire product is well made and feels solid. I was surprised at the size of the display. Larger than I expect which is a positive. I did mount the display under my router table as I remove my router fence quite often. My router is attached in my table saw wing. The display is able to fold out of the way as needed. The accuracy of this DRO is spot on. Every time I make a cut and measure with my digital calipers the cut is spot on. I am going to really like this new piece of equipment especially using it with my new lift. I messed up big time during install. Before I had my wires tucked away I just had to try the DRO. After setting up a bit and making a cut I was walking away from the table and caught my foot on the wire. This pulled the micro plug out of the display and damaged it so it no longer worked. Yikes - now what? The display and wire going into the DRO, which is hard wired, appeared to be ok. I was able to buy a 5 pin male micro pigtail and spliced the 5 wires from the DRO to the new micro plug. Delicate work. All is back up and running. Live and learn. Pictures not great but all I have right now.

Did you find this helpful? 4 of 4 Found Helpful

Reviewed by: (Verified Buyer) Kenneth Ellingwood from Maine on 12/7/2024

Angle Cube -3rd Generation

$40.99

In Stock.

(2)

Select Options

iGAGING Snap-Check PRO

$44.99

In Stock.

(2)

Add To Cart

iGAGING Bandsaw Companion

$31.99

In Stock.

(8)

Add To Cart

EZ-Check Digital Height Gauges

$47.99

In Stock.

(1)

Select Options

iGaging EZ-View Router Lift DRO

Related Items