This pair of 90/45 squares measures just 3-9/16” x 3-9/16” and is small enough to keep in your apron pocket. Accurate to within 0.001” over the length of each side, it is the perfect tool to set up machinery (table saw, bandsaw, jointer, etc.) or to check boxes or drawers for squareness.
A removable sliding metal foot attaches to either side of the square via two rare earth magnets to provide an edge guide when placed against your workpiece for easy and accurate measuring and marking.
The rare earth magnets can firmly attach the square to any steel surface for hands-free adjustment. The laser engraved imperial graduations (Zero to 3-1/4”) are handy for setting table saw blade and router bit height.
Cutouts in the body allow for use as a 90-degree clamping square.
The square is machined from a solid block of aircraft-grade aluminum alloy, surface ground, and then anodized. The removable steel foot has a brushed finish.
3-9/16” x 3-9/16” x .720” thick and 5” along the hypotenuse
Metal foot is 3-9/16” x 1” x 3/16” thick
Both sides have Imperial (Inch) markings in 1/16th