An adjustable height/tilt mortising platform (31” long by 7” wide), with 5
T-tracks and 2 vice L-clamps/stops, that provides horizontal work holding for
cutting on the face or edge of a work piece. It attaches to Router Boss's sliding bar
providing power feed capabilities when cutting mortises, grooves, and flutes.
A cutout in fence provides for crosscut operations and a V-slot in fence allows
round object clamping. In addition to horizontal work holding, a slot in the
platform allows boards up to 5/4" by 3.5" wide to be clamped vertically
for cuts on end of board (requires an optional
This provides the unique capability to cut both a mortise and a mating tenon with same
As an additional option, the mortising platform T-track can be separated and
attached vertically directly to the sliding bar providing additional work holding capabilities for miters, half-laps, raised panels or other joinery with the wood secured by T-track clamps either vertically or at an angle. With this setup, included locator pins can effortlessly position the work at 15°, 22.5°, 30° and 45° angles.
You can shop-make a simple mortise rail from wood or MDF with plans in our manual, but our aluminum mortise table provides more function and unique versatility. Can be mounted on Router Boss or WoodRat.
See assembly diagram.