No More Mistakes! You can now set up the bit height on your router table precisely with iGAGING's new EZ-View Router Table Lift Digital Readout (DRO). It is very flexible regarding installation options so that you can adapt it to just about any router lift. Once installed, raising or lowering your router bit an exact amount is straightforward without eyeballing a ruler, counting revolutions, or grabbing your height gauge. Observe actual bit height adjustments in real-time as made.
Mounting hardware included. Kit requires drilling two small taps in your lift using the drill bit & tap supplied or mounting with very high bond (VHB) tape.
The large, easy-to-read backlit DRO reads in inches, fractions, or millimeters and mounts easily to a ΒΌ" T-track on the router tabletop or fence or can be mounted under the router tabletop and angled outward.
It's an ideal solution for router lifts made by ChipsFly, Woodpeckers, Jessem, Incra, Kreg, and others.
Installation and Operation Video
Features:
Measuring Range: 0 - 4"/100 mm
Resolution: 0.0005 inch / 0.01mm / 32nd inch
Accuracy: 0.0015"
ABS function
Aluminum beam
Powered by a long-lasting 3V CR2450 battery or by an 80" USB cable and AC adapter (both included)