The GRR-RIPPER 2GO™ virtually eliminates kickback. Kickback
can occur when the wood moves in a way that makes the saw blade catch it and
throw it at you. The GRR-RIPPER 2GO™ holds both sides of the cut parallel to
the blade, so the saw blade doesn't catch it and you stay safe.
Three directions of force provide essential stability for superior precision,
safety, and control.
No assembly. Easy setup.
The legs of the GRR-RIPPER 2GO™ are staggered so any rip cut
from 5/16” (8mm) to 2” (50mm) up can be made with the blade passing safely
underneath. GRR-RIPPER 2GO™ comes with our patented Color Coded Index to help
you set your cuts properly.
Apply the provided see-through Color Code Index sticker to
your saw’s rip fence scale. Whenever you set the rip fence, the color showing
under the cursor, shows how to position the GRR-RIPPER 2GO™ against the fence.
Correct set ups are a breeze!
How it works.
Step 1 - Set your fence to the desired cutting width, and see which color the fence scale lands on.
Step 2 - The GRR-RIPPER 2GO™ has two ends with different colors on each end. Use the end with the color from Step 1.
Use it around the whole shop.
For use with table saws, bandsaws, router tables, and
jointers.
Band Saw
The
Grr-ripper2 Go's legs and main body maintain a constant 90 degree
angle. It can be used on its side which is ideal for resawing on
bandsaws. The Grr-ripper2 Go glides along the table top and applies even
pressure against the fence with your hands clear of the blade. Even
pressure means less blade drift, resulting in smoother cuts.
Router Table
The
Grr-ripper2 Go provides incredible command over your workpiece on the
router table. Whether you’re using the fence or freehand routing, its
powerful grip controls stock and protects your hands from dangerous
spinning bits.
Jointer
The
GRR-RIPPER 2GO’s proprietary Green Grr-rip material provides all the
traction you need to properly flatten stock on the jointer. Because of
its powerful grip, you can feed material over the cutter head without
having to apply too much downward pressure. The GRR-RIPPER 2GO™ makes
proper face-jointing technique easy, and safe.
- Protect your hands and fingers from cuts and injuries like a moving-blade-guard™.
- Virtually eliminate kickback. Don't use a table saw without it.®
- No assembly. Easy setup. The fastest GRR-RIPPER ever.
- Cut small parts safely and accurately with powerfully gripping precision legs.
- The legs minimum cutting width of just 5/16" (8mm), perfect for making precise, thin cuts.
Rip without stopping and burning
Using
another GRR-RIPPER 2GO™ allows you to feed long stock without stopping,
virtually eliminating burning and blade marks caused by inconsistent
feed rate. Parts come off the saw ready to use with little to no
additional sanding or planing.
