Set includes both 6" and 12" T-Marking Squares
Meet the new T-Marking Squares from iGaging. They are precision made from sturdy sheet aluminum and an extruded aluminum base. Along the blade’s sides are engraved rulers for measuring and a series of holes for drawing lines parallel to an edge. On one side, the holes are every 1/16” (with ruler markings every 1/32”), and on the other side, there are holes every 1/8” (with ruler markings every 1/16”).
Lay the base against the edge of your wood and, using a standard pencil, place the tip into a hole and draw your line as you slide the T-Marker along the edge.
Plus, since the blade slides to either side of the base, you have a right-angle guide from either side.
In addition, there are rules at each end for measuring from the blade’s sides.And a hanging hole, so they are always ready to grab and use.
The simple yet handy protractor lets you mark out angles along the side of boards or in the middle of a plywood sheet. To use the protractor, place the blade over vertical and horizontal axis marks, as seen through the guide holes.
A New and Improved heavy duty shop case is included with the set, as well as a Free mechanical pencil and lead.
Stumpy Nubs YouTube video:
Description:
6" Square: 32nd Scale, 6"x3" Rule, 1"x5" Sliding Base
12" Square: 32nd Scale, 12"x3" Rule, 1"x5" Sliding Base
Accuracy: 0.002"
